Torque limiters are also called slipping clutches, and are a mechanical component that is mainly used in the paper feed mechanisms of office equipment such as printers and photocopiers.
C-type torque limiters have a structure with a coil spring press fitted onto the outer circumference surface of an inner ring that uses the
friction force between the two components to limit the torque transmitted from the input side (drive side) to the output side (follower side).
Torque limiter (also known as torque limiter, safety coupling, safety clutch), is a part of the connection between the driver and the working machine, the main function is overload protection, torque limiter is when overload or mechanical failure caused by the required torque exceeds the set value, it in the form of skidding to limit the transmission system driven by the torque, when the overload situation disappears after the recovery of the connection. This prevents mechanical damage and avoids costly downtime. The torque limiter uses a spring-loaded friction surface with nuts or bolts to adjust the spring force and preset its sliding torque. According to the working principle, it can be divided into friction type torque limiter and steel ball type torque limiter (ball type torque limiter), application range: electronic equipment industry, automatic production line, conveyor industry, etc.
Product picture:
ORIGIN Torque limiter OTLC-Type/OTLV-type Introduction:
Torque limiter is a mechanical device used for overload protection of mechanical transmission. Once the force is greater than the set torque, the device automatically cuts off the transmission power. It is used to prevent multiple paper feeding of machines such as copiers and printers, or to release the drive when the motor is overloaded. Eurycrystal Electric torque limiter is available in type C and Type V, both models have a positive and negative two-way torque limiting function.
The torque limiter is also known as the sliding clutch, which is mainly used in the paper transfer part of office machinery such as printers and copiers. Torque limiter OTLC type is the outer pressure coil spring of the inner wheel using the friction of the two parts, so that the torque of the force side (driving side) to drive the output side (driven side) of the power, the effective control of the action structure.
Features:
1. Can rotate in both positive and negative directions * Can be used in both positive and negative directions (clockwise/counterclockwise).
2 Small. Light weight *OTLC-A model specification Outer diameter Φ16 weight 5gw
3. Environmental conditions (temperature/humidity) * Use environment 0 degrees to 60 degrees, 90%RH
Precautions for use:
1. The torque limiter will change when the torque value changes on radial bearing, axial bearing and partial bearing.
2. Please pay special attention to assembly.
Audited Supplier 
){kind=link}